![]() |
|
|
|
#1
|
||||
|
||||
|
Someone explained this once but I can't remember exactly why.
I think it has something to do with adjacent channels, in other words your area would more likely have a channel lineup in this order rather than 2-3-4-5 and so on. |
|
#2
|
||||
|
||||
|
Only thing I could guess is the knob has removable
numbers that got jumbled up. IIRC there is a kit on e-bay now for UHF strips with a numbers set. Much like for the 70's 12 & 18 channel selectors. As far as the tuner goes if its a turret tuner you can put the strips in any order you want. 73 Zeno
|
|
#3
|
||||
|
||||
|
I have read that the strange numbering on the tuner was to make for quick tuning in most areas by skipping over adjacent channels that would not be assigned in a given area. Of course, cable changed that by using adjacent channels. For example the 2,4,5,7,9,11,13 group would be perfect for the Seattle area in the 50s, while 3,6,8,10,12 would be well suited further south in Portland. Remember, 4 and 5 are not considered adjacent channels because of the 4 mHz wide aircraft locater band situated between the two channels.
jr |
![]() |
| Thread Tools | |
| Display Modes | |
|
|