![]() |
|
|
|
#1
|
||||
|
||||
|
Unless it is one of the models with a power transformer I recommend sticking with RF. Video injection would entail connecting chassis ground (at 120 VAC) to your box's video ground (at 0 VAC)....The most likely result of that is releasing the magic smoke of death from the shiny new box.
The only time to go with video injection is when the RF/IF is beyond your ability to repair it.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
#2
|
|||
|
|||
|
Yikes! Hadn't thought about that. What about if running the set on an isolation transformer? I have one that allows me to also set the line voltage to 117 so I was thinking of using it in any case to lower the line voltage.
My understanding is that direct injection allows for the best picture possible. Tuning the IF and getting as good a picture as possible seems like a real challenge and if nothing else it would be good to have something to compare with when attempting alignment. Regardless, I need the same sort of converter, no? Thanks! Jonathan |
![]() |
| Thread Tools | |
| Display Modes | |
|
|