Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 08-01-2016, 06:46 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
When I worked on the CBS/Motorola EVR video player, we noticed that the Hamamatsu PMTs were less noisy than the RCAs, but would become equally noisy if exposed to fluorescent lighting.

I do not know or recall if the output decreased and the extra noise came due to turning up the dynode voltages.

I do not know if they recovered after some time, as we did not re-use the degraded ones and carefully replaced them with new PMTs in a relatively dark room. The players were demo units, so we wanted to cherry pick the least-noisy units.

I speculated that the Hamamatsu PMTS were assembled and packaged in a dim environment and the RCAs came "pre-exposed," but I have no actual knowledge of that. Photoemissive materials are so open to degradation that it could easily have been a difference in processing, not light exposure at the factory.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.