Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > The Amateur Radio Spot

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 07-24-2016, 01:40 PM
davet753's Avatar
davet753 davet753 is offline
David Thomas
 
Join Date: Mar 2013
Location: Knoxville, TN
Posts: 443
Several manufacturers are moving towards SMA connectors for HT antennas. I bought a Yaesu VX8-DR last month, and it uses an SMA connector (male instead of female like the Baofeng).

I use the Nagoya NA771 on my 5 watt Baofeng, and use the 771R on my 8 watt. The 771R is telescopic, so it's easier to carry around by simply collapsing it. Either way, the Nagoya's perform much better than the stock rubber ducks.

I'm going to pick up some 300-ohm twinlead at the upcoming Huntsville hamfest, and plan to make a roll-up J-Pole to use for my HT's. The Yaesu I bought is a quad bander (2, 6, 220, 440), so I think I'll make one for each band. From what I have heard, a roll-up J-pole hanging from a tree limb will outperform even the best HT antennas.

If you want to use a regular PL259 antenna connector, I'd recommend using a pigtail type such as the one in this link: https://www.amazon.com/DHT-Electroni...s=sma+to+pl259

The pigtail type is less stressful on the HT connector than the adapter when you have a big coax attached to it.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.