Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 07-15-2016, 11:24 AM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by madlabs View Post
Although it says on the schematic not measure between 5 and the HV output, it gives an expected measurement of 385 ohms. I figured that the do not measure was for older VTVM's, so I checked it anyway, 366 ohms. So the top coil seems good, lower coil a little low in resistance. Shorted turns? When we pulled the HV rectifier tube, it was completely cool to the touch. With the really low filament voltage I am not sure how warm it should be.
I'm pretty sure that warning means not to measure the voltage with the set powered up, because of the presence of high voltage spikes. There should be no harm in measuring the DC resistance when the set is powered down.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:53 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.