Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 06-20-2016, 07:17 PM
reichsrundfu reichsrundfu is offline
VideoKarma Member
 
Join Date: Jun 2013
Posts: 96
Firstly, what is your input source, direct cable or DVD hookup or via analog modulator (mini tv transmitter).

Do you have the local-distance switch set to distant or local or distant?

Have you fine tuned the channel selector???

Are there any local interference producing sources close by the set?

What is the condition of any lead in wire or cable to the back of the set?

If you are using a local modulator and receiving signal via the TVs local antenna, what's the condition of the lead in wires and the antenna?

If you're set had UHF, have you accidentally connected your input to the UHF terminals or the correct VHF terminals??

George
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:27 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.