Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-20-2016, 07:02 PM
Lightfoot Lightfoot is offline
VideoKarma Member
 
Join Date: Jun 2016
Posts: 6
Init4fun-

Thank you so much for the wealth of information!

I just got the tube out, it is marked RCA Radiotron UV199

Now that I know what is needed, I will see if he wants to attempt to get it going. There is a set of Newcomb headphones with it, however I'm embarrassed to ask but... where do they plug in?
Not sure if you can tell from the picture of the headphones, but the ends do not seem to me to have anywhere on the radio to go, though I'm sure they must - I'm just wondering where?

Thanks again!
Reply With Quote
  #2  
Old 06-20-2016, 09:17 PM
init4fun's Avatar
init4fun init4fun is offline
VideoKarma Member
 
Join Date: Mar 2011
Posts: 1,210
Quote:
Originally Posted by Lightfoot View Post
Init4fun-

Thank you so much for the wealth of information!

I just got the tube out, it is marked RCA Radiotron UV199

Now that I know what is needed, I will see if he wants to attempt to get it going. There is a set of Newcomb headphones with it, however I'm embarrassed to ask but... where do they plug in?
Not sure if you can tell from the picture of the headphones, but the ends do not seem to me to have anywhere on the radio to go, though I'm sure they must - I'm just wondering where?

Thanks again!
Hi Rachelle ,

I'm happy you got the tube out and yes indeed , the 199 was a very common type used in the single tube radios . The reason I mentioned a "period correct" set of headphones is that I had thought (mistakenly) that the Newcomb brand was newer than your radio , but looking at the picture again I see that those are indeed from the right era to belong to that radio . The ends of the wires will go under the little screw terminals on the left front of the radio . the black one on top and the silver one on the bottom will unscrew a ways (also counterclockwise) to reveal a hole where the pin on the wire will go , and then tighten down the terminal to hold the pin in place . The great thing about it being a one tube set is that if you do decide to try to get it to work you won't need too many batteries compared to , for instance a 6 tube battery operated set , those can get somewhat pricey to provide batteries for . In fact , a lot of folks with the multiple tube battery sets will run them off of modern day designed and built power supplies that work with regular house electricity so they can be run regularly without the $pendy batteries ....

Last edited by init4fun; 06-20-2016 at 09:36 PM. Reason: The dreaded Typo Monster ...
Reply With Quote
  #3  
Old 06-21-2016, 12:30 AM
EdKozk2 EdKozk2 is offline
Tinker
 
Join Date: Mar 2014
Location: Elkhorn, WI
Posts: 542
Hi Rachelle,
In addition to all the good information given you, I'll throw in my two cents.
You most likely have a regenerative reciever. Many of those old 1920's battery sets used two 22 1/2 volt batteries to come up with 45 volts total for the "B" supply. The lower voltage can help to reduce howling and squealing in the head phones when listening. With a good antenna your type of radio should even work with about 24 volts for the "B" supply. I have been able to go as low as 16 volts, just for testing.
Ed
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:38 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.