Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-04-2016, 07:39 PM
Kamakiri's Avatar
Kamakiri Kamakiri is offline
Administrator
 
Join Date: Jun 2002
Location: Buffalo, New York
Posts: 5,109
I should have the sams. Drop me a PM with your email address and give me a day or two to pull it and scan it.
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia."
Reply With Quote
  #2  
Old 06-05-2016, 10:52 AM
IsthmusTV's Avatar
IsthmusTV IsthmusTV is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Madison, WI
Posts: 329
Thanks for the replies, guys! This should be a fun restoration. For one thing, it's super easy moving it around on the bench

And thanks, Kamakiri (I think your name is Tim) I'll send you a PM shortly.

-Clark
Reply With Quote
  #3  
Old 06-08-2016, 12:19 PM
IsthmusTV's Avatar
IsthmusTV IsthmusTV is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Madison, WI
Posts: 329
Thanks to Tim, I got a scan of the SAMS and was able to make some good progress. I recapped the power supply with 'lytics I had on hand which meant paralleling some caps to get the right values. The new caps are so much smaller that it was no problem finding space.


I powered it up with a metered variac and got a raster right away. Current draw after warmup was about 850 MA from the AC line.


I fed it a signal and made the usual adjustments and got this:


Horizontal and vertical lock are very stable. Obviously it still has some issues, but not bad considering that it's still full of cruddy paper caps! Next, I fed it programming from a cable box. The picture looks pretty good, although the CRT is a bit dim (the brightness is up full). The sound works, but is very buzzy. I'll hold off on making any adjustments until I've finished the recap.




The contrast control is a bit flaky. I cleaned it, but I get the highest contrast in the middle of its range. Again, probably a leaky cap. All in all I'm happy with the first power-up
-Clark
Reply With Quote
  #4  
Old 06-08-2016, 09:04 PM
Kamakiri's Avatar
Kamakiri Kamakiri is offline
Administrator
 
Join Date: Jun 2002
Location: Buffalo, New York
Posts: 5,109
Looking great! These are really fun little guys to restore, and surprisingly roomy inside. I rebuilt this one last year, here's a "before" shot. Ended up trading it to another collector and I believe he sold it on ebay.....
Attached Images
File Type: jpg 0327151128.jpg (89.9 KB, 28 views)
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia."
Reply With Quote
  #5  
Old 06-09-2016, 09:56 AM
IsthmusTV's Avatar
IsthmusTV IsthmusTV is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Madison, WI
Posts: 329
Thanks, Tim. Yes, I was surprised at how relatively uncrowded things are on the chassis. It's fun having such a small portable from the 50's, and it let me keep my promise to myself not to bring home any more consoles

It may be a while before I finish work on it (so many other projects) but I will definitely post photos when I do.

-Clark
Reply With Quote
Audiokarma
  #6  
Old 06-19-2016, 01:23 PM
IsthmusTV's Avatar
IsthmusTV IsthmusTV is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Madison, WI
Posts: 329
I finished the recap and clean up. For the most part, things went pretty smoothly. Probably the most difficult task was working on this cramped corner that required removing a shield, the CRT and the yoke.



Here it is playing after the recap. The picture is surprisingly good.


The only issue is the linearity is not great. I spent way too much time adjusting and readjusting the centering magnets, ion trap and vertical height and linearity. (I ended up replacing those blue caps in the vertical section that had been added sometime in the past.) This is about as good as I could get it.


I also discovered that the flyback was getting hot and dripping wax. I checked voltages, and found that the 205 Volt supply was measuring 212 Volts. Someone had already added silicon rectifiers but had not added a dropping resistor. I added a 25 Ohm, 20 Watt dropping resistor that brought it down to just over 200 Volts. Now the flyback gets warm but not hot like before. I removed the selenium rectifier to create a nice spot to mount the resistor.


Here's the chassis ready to be reinstalled and a shot of the set back together.



This is a fun little TV! The screen geometry issues don't really show up while watching programming. There is still something a bit wonky with the vertical; there seems to be a bit of fold over at the bottom in the vertical blanking interval.

Here it is playing My Three Sons in the kitchen. The noise in the picture is from the cheap DTV box.



Here is the pile of parts that were replaced to get this little gem going again. It's 60 years old this year!



-Clark
Reply With Quote
  #7  
Old 06-19-2016, 04:05 PM
kvflyer kvflyer is offline
VideoKarma Member
 
Join Date: Nov 2006
Location: Fernandina Beach, FL
Posts: 1,132
Nice! And as we all know, it is an accomplishment that is appreciated by a few of us and not necessarily understood my most. Lots of work for a small black and white pictrue. Lots of parts replaced. But what a neat thing to do and why? Because we can.

Great thread, great jub.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:12 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.