Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 05-30-2016, 03:47 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
Just a thought or two.. The Riders procedure pre-dates the conventional practice of using a sweep generator and scope for alignment. Is there a Sams of this set giving sweep alignment instructions? If so, learning sweep alignment would be far more beneficial long-term than trying to do a one-off using the obsolete procedure.

If nothing was disturbed other than those two IF xfmrs., I would first try tweaking them, looking for best fine detail in the pic consistent with no ringing or smearing of detail.

If alignment is still necessary, and if sweep alignment instruction for the set is available, try to get someone with a genny and scope to mentor you. Or if you already have genny and scope, the collective wisdom here could walk you through it. (Of course the genny has to be able to do the old 24 mc. IF.)

While the old method may work OK, the scope gives you a visual graphic of exactly what the IF strip is doing.

BTW, the two things you replaced were IF transformers and not traps, right?

Last edited by old_coot88; 05-30-2016 at 06:49 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:30 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.