Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 05-29-2016, 05:15 PM
TUD1 TUD1 is offline
VideoKarma Member
 
Join Date: Jan 2014
Posts: 1,616
I did attempt to read the manual, but it did not make much sense to me. I set all the controls by the instructions for NTSC patterns, and this is what I got. I found that I got better signal by plugging in an RCA cable to the "Standard Video Out" plug than with the BNC plug that I paid $10 for. The RCA cable goes to two gator leads that go on the VHF terminals. This method worked for my Sencore CG159.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:23 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.