Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 05-26-2016, 10:24 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
This control works by creating a DC current component due to the full conduction by the diode with no resistors compared to reduced current on the opposite half cycle with the resistors in series with the other diode. This both reduces the AC current and induces eddy current braking due to the DC component. The eddy current braking dissipates the braking energy in the motor and is therefore both inefficient and causes heating of the motor. It can only be used over a small percentage range of adjustment. If you tried to slow the RPMs by 17% to go from the 60 Hz speed to the correct speed, you also would reduce the torque, possibly too much for reliable operation, and also quite possibly overheat the motor.

I speak from experience, as I worked on a similar speed control for a video film player in the early 70s that used essentially the same circuit except that the diode was replaced by an SCR triggered by frame sync pulses. In that case, it conducted not for a half-cycle, but for a time depending on the phase of the pulses. So, the excess dissipation was somewhat different than it would be in this circuit, but the principle still applies.

Machining the pulley is the only reasonable approach.

EDIT: R14 appears to be simply reducing the (AC) voltage across the capacitor winding to get the nominal speed to coincide with centering of the fine control.
EDIT #2: The large value of R14 makes me wonder if the capacitor winding contributes much to running torque - maybe mainly starting torque?
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany

Last edited by old_tv_nut; 05-26-2016 at 10:38 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:37 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.