![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
http://www.universal-radio.com/catal...alty/0068.html By the way, it is a HOT radio for FM dx, that far outperforms (in sensitivity and selectivity) every vintage Zenith that I have ever owned, including a TO 3000 and Y-832 ![]() jr Last edited by jr_tech; 05-21-2016 at 08:07 PM. Reason: clarification of performance criteria |
|
#2
|
||||
|
||||
|
Quote:
As to FM DX, you are probably surrounded by mountains. The only "FM DX" you probably get is within the state you live in, unless you have an FM antenna mounted ridiculously high. Here in northeastern Ohio, I have yet to hear any FM stations from California or anywhere hundreds of miles away. The best "FM DX" I have ever had was in the summer of 1970, when a local FM station was knocked off the air in a thunderstorm. The station I heard while the local one was silent was in West Palm Beach, Florida on 107.9 MHz. I had a cheap stereo FM portable radio at the time with a telescoping antenna, nothing more. Once the local station was back on the air I never again heard that station, or any other FM stations from Florida--or anyplace else hundreds of miles south, east or west of where I live. The only FM DX I get here, as a rule, is from Detroit, southwestern Ontario, Canada, Erie, Pennsylvania and Youngstown, Ohio. I am within one mile of the south shore of Lake Erie, so I can get the Detroit stations, as well as the others I mentioned, quite well in the summer on any of my Zenith radios. How can a radio such as your "Sangean" portable be better from an FM selectivity and sensitivity standpoint than any 50+-year-old Zenith radio? Your set must have an FM section hotter than a firecracker if it can outperform most older tube-powered radios. Most of today's FM radios are nowhere near that sensitive or selective. The digital FM tuner in my bookshelf stereo system, for example, is almost useless in my area, which is about 40 miles from Cleveland's FM stations. I am sure it would work well in the Cleveland suburb I moved here from 16 years ago, but in a semi-fringe area such as the small east-central Lake County, Ohio town I live in today, it doesn't work well at all. I cannot listen to the local NPR station, for example, when my computer is on due to the CPU hash, and stereo FM reception is iffy at best on some stations; therefore, I listen mostly to my own CDs, cassettes and audio files stored on my computer for music, having almost completely abandoned FM radio. I realize a better antenna would solve the reception problems I have here, but since I live in an apartment building with lease restrictions forbidding outdoor television or FM antennas (every tenant in this building, including myself, has cable or satellite for TV and probably uses short indoor antennas for FM, no antennas), such antennas are out of the question.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. Last edited by Jeffhs; 05-22-2016 at 01:14 PM. |
|
#3
|
||||
|
||||
|
Quote:
Don't get me wrong... I love and collect vintage tube devices and really admire them for what they were, but the arrow of time keeps moving forward. Indeed, many radios sold today are designed to a low price point and are poor performers, but there are also a large number of great performing radios, if you know were to look. jr |
|
#4
|
||||
|
||||
|
When I replaced the selenium in mine, I used a bridge rectifier.
![]() Full wave rectification, less power supply hum (120Hz vs 60Hz). The heater string runs directly off the powerline (via power switch). The mid point of the heater string will look to have minimal AC waveform in reference to the B- line of the bridge rectifier. But will have a DC bias of about half the B+ voltage. This is fine, cathodes like their heaters to have a positive bias. One end of the audio output tube (for example a 50C5) (#8 in the diagram) heater is probably already connected to one of the AC lines. Disconnect the heater line of the other audio output heater pin. This line, now disconnected (feeding to tube #7), now will be connected to the other AC line. See diagram. And at the old ground end of the heater string, usually the AM or FM detector/ audio driver tube (#1) (19T8 for example) disconnect from ground and connect to the now loose end of the audio output tube heater. This should minimize hum pickup from the heater line. A small cap of around 0.1uF 400V or more tied close to the heater string midpoint should help reduce the AC waveform some more by holding a bias charge between the heater string and the B- ground of the radio during the time the bridge rectifier isn't conducting. The bridge diodes only conduct at the peaks of the AC powerline waveform. Pay special attention to the AC line lead dress around the volume control power switch for hum pickup. Hot chassis radios usually switched the local ground feed line to avoid hum pickup from 120VAC to local ground wires. This could ruin the advantage of full wave rectification (less hum, 120Hz vs 60Hz) if not taken care of. Look for trouble by listening to silent passages in radio programming with the volume control at half setting (hum pickup can be more severe at this position). Shielding may be needed.
__________________
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|