Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #25  
Old 05-15-2016, 07:51 AM
Captainclock Captainclock is offline
Banned
 
Join Date: Dec 2013
Location: Elkhart, Indiana
Posts: 1,189
Quote:
Originally Posted by jr_tech View Post
I'm guessing that the screws that attach the amp board to the heat sink might be filled in with solder to prevent removal... these *should* be left intact. the screws that hold the board/heatsink assembly to the chassis are the ones that need to be removed to remove the amplifier.
Try a better screwdriver on the tuner screws. Do you have any "Liquid Wrench" ?

jr
No I don't have any liquid wrench, and I tried all the screwdrivers I have on the screws and they won't budge without just about stripping out the heads. So I don't know what to say about those screws. although those screws do have a very bad case of cadmium disease as well as a lot of other parts in this unit.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.