Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Flat Panels & Digital Format

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 05-03-2016, 08:30 PM
Captainclock Captainclock is offline
Banned
 
Join Date: Dec 2013
Location: Elkhart, Indiana
Posts: 1,189
Quote:
Originally Posted by jr_tech View Post
Yes that might help, if you can get a clear shot.

jr
update: looks like you should be able to get to the terminal on the other side of the board and measure it... or unsolder it if necessary.
Well I measured the fuse and it seems that it might be open possibly because it measures about 2 ohms and not 0 ohms like you said it should if it weren't blown. good news is that the fuses this thing takes are still available over at mouser for like 11 cents a piece. So it shouldn't be too hard to replace the fuse (although they have the fuse glued into place with that nasty white glue that turns to a rubbery consistency when it dries so it will be tricky to try and get it out of the circuit without damaging the circuit board traces.) What's a good way to get rid of that glue without damaging anything?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.