Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-28-2016, 07:26 AM
init4fun's Avatar
init4fun init4fun is offline
VideoKarma Member
 
Join Date: Mar 2011
Posts: 1,210
Hi Henry ,

Im not sure I understand your question . You say the unit will give up to -22 volts and the tube only needs -16.5 of grid bias , I'd adjust it for the -16.5 and call it good . You mention the instruction specifying -4.5 volts but it says that is for one particular tube type , the 201A or 301A , and that other tubes will use the value of grid bias as listed "In the instructions packed in each tube carton" .

A quick peek at the 71A's specs reveals that at +90V plate the bias will be -16.5V with 10MA of plate current flowing . You could connect a meter measuring in MA into the plate circuit and adjust for 10MA or less .

Interesting to note , the 71A can operate as high as +180V plate , -40.5V grid bias , at 20MA plate current . You'll have to stick to your +90V plate however , since the specs at even +135V plate call for -27V of grid bias , and your C supply maxes out at -22V .

PS , in the Atwater Kent drawing , they have the A- and B- strapped together with the green wire between terminals 2 & 3 , this is proper and is what I'm used to seeing . So why does the ARBE unit's drawings show the B- connected to the A+ ? I think I would connect it the way Atwater Kent has it wired .....

Last edited by init4fun; 04-28-2016 at 07:40 AM.
Reply With Quote
  #2  
Old 04-28-2016, 09:41 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
I agree with the last poster, regarding the AK battery connections.
I built my Coronado farm radio supply, from scratch, using the thin plywood breadboard format. It looks alright.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:44 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.