Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Television Broadcast Gear

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 04-21-2016, 02:51 PM
MIPS's Avatar
MIPS MIPS is offline
VideoKarma Member
 
Join Date: Jun 2014
Location: West Canadia
Posts: 1,023
I don't think I've ever heard of a camera using a tube pickup instead of a CCD being referred as a CRT camera, so pardon me if I seem a little lost.

Being a tube camera, you can really only replace pickup with the same tube or a listed and known substitute. Parts from a consumer will not work. Saticon and Newvicon in fact are two different tube technologies and as such, I'm not seeing any subs.

Quote:
Now i’m figuring out if these CCU cables are/were pinned out differently for each brand, model, etc or if i could acquire some CCU and a CCU cable and use in both/any cameras.
Consumer cameras unless you were Sony with their "K-Connector" used the 10 pin EIAJ interaface. Labguysworld has a full page on this. The CCU's literally just broke out the lines from the cable but otherwise you gave the camera +12v and it gave you back composite video and line level audio.
I've never touched the more high-end cameras but looking at photos of the connections it's pretty close to the same, but with no EIAJ connection. Give it 12v and it will give you a video output.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:55 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.