Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Flat Panels & Digital Format

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 04-17-2016, 07:28 PM
dr.ido's Avatar
dr.ido dr.ido is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: SE Melbourne, Australia
Posts: 550
I've seen more of these with bad buffer and/or sustain boards than with bad power supplies. Check that buffer board isn't shorted before replacing the sustain board. A shorted buffer board can kill the Y-sustain board.

In your second picture there it looks like there is a heat mark on the Y-sustain board. There will probably be a FET on the other side of the board that has gotten too hot.

I've found and replaced shorted FETs on these before, but more often than not there are other faults. Easier to replace the Y-sustain board with one pulled from another set.

These panels crack very easily. I've cracked a couple myself while handling them (especially frustrating when it happens AFTER you've fixed it).
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:42 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.