Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 04-02-2016, 08:02 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
The filament is powered from a winding on the flyback transformer and there is a small value resistor in the filament line. On all sets, it's a fairly common problem for this resistor to open. Of course, that still does not explain why it's not lighting up with the CRT tester (unless something is wrong with the tester or the socket).

The TV is likely an ex-hotel/motel set. In the '90's, we had some flophouse motels that still used some older RCA sets (late '70's-early '80's); but, those had either a standard two-knob tuner or a single knob varactor tuner (all of them had AM/FM radios). The older ones used a CTC97 chassis. The newer ones used CTC108 and CTC120's. Your set looks to have a CTC136 chassis.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:14 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.