Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-28-2016, 11:48 AM
pendulum pendulum is offline
VideoKarma Member
 
Join Date: Sep 2014
Location: West Suburbs, Chicago IL
Posts: 122
Well I must have made an error at some point. I was replacing the resistor chains in the high voltage area, along with the shorted ac cap and a few resistors on the pots. Now when I turn the set on and the flyback area kicks in something makes a horrible squeal. I was getting an image, and adjusting the horizontal sync control would change the noise, but I was not getting any image or sound like I did before. After turning the set on and off a few times I no longer get high voltage. I ohmed out the flyback and it doesn't appear that any of the sections are open, I'll have to check for shorts between the windings. My hope is that the problem is due to my replacing the resistors in the high voltage chain but not putting any insulating coating on them like was there before. I ordered up a can of corona dope and will see if that changes things when it arrives wednesday. The fact that adjusting the sync did effect the sound really makes me think there is some issue around the 6l6 and 1B3 tubes, though I don't know why this would also kill any sound or video.
Reply With Quote
  #2  
Old 03-28-2016, 07:23 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Quote:
Originally Posted by pendulum View Post
My hope is that the problem is due to my replacing the resistors in the high voltage chain but not putting any insulating coating on them like was there before.
I didn't put any corona dope on those resistors when I replaced them in my 661-P, and it seemed to work normally. I did insulate their leads with shrink tubing and I took care to make all solder joints in that area very smooth.

If arcing is going on, you may be able to see it by turning on the set and observing that area in a completely dark room.

If anyone wants to look at the factory service manual, it's available here:

http://www.myvintagetv.com/Apple%20P...e%20Manual.pdf

Regards,

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:34 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.