![]() |
|
#38
|
||||
|
||||
|
I'm restarting this thread.
I got a bee in my bonnet about my (this thread's) TRK-120 radio (its for sure a TRK-120 radio as it has no feedback switch nor eye tube). The TV continues on it way as a I reported above. Electrically the radio works perfectly. Mechanically the motor system also works perfectly and stops nicely. The push buttons have proven somewhat dicey. The push buttons themselves were sticky and a big problem. In a two hour marathon I managed to get them all off and reamed them out with a 1/8 inch end mill. This fixed that. But the contacts on the push button bars are flaky and seem to require constant attention with DeOxit. I suspect that the only cure for this is to take it apart and gold plate everything heavily. But that's not the major annoyance. The radio/amplifier works perfectly on TV shows or voice-only radio programs. But on our two local AM music stations (which I need never actually listen to on it of course) it is abysmal. Its more abysmal at the bassiest setting. It sounds like the speaker bottoms out. These stations DO have excessive low, very low, frequency bass. The radio has a built in bass boost at low volumes that can easily be fixed if one wants nonoriginality. Is this a characteristic of the speaker mounted in an unclosed cabinet, or does it need a rebuild job? Also, the volume control has returned to scratchiness. Last summer I inquired about a replacement and somebody said they had one. BUT ... would it be equally troublesome? Mine worked perfectly after removing the tin whiskers and using DeOxit on it. Should I punt and install a modern or st least late-40s/50s control? Last edited by dtvmcdonald; 03-26-2016 at 12:57 PM. Reason: bad line lengths |
| Thread Tools | |
| Display Modes | |
|
|