Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 03-18-2016, 10:05 PM
Tubejunke's Avatar
Tubejunke Tubejunke is offline
VideoKarma Member
 
Join Date: Apr 2003
Location: Martinsville, VA
Posts: 1,823
I have looked at a few Webpages relating to these old signal tracers and so many have popped up with missing RF probes that people build them. It's not like I'm dealing with some extremely difficult circuit. Most any unit can have a probe made out of a couple of resistors, a detector diode, and a low value capacitor.

My confusion mainly stems from not really knowing the nature of the instrument, but it's quite obvious that something is wrong if I have to disconnect the center conductor of the probe to get fairly normal, or dare I say reasonable performance out of the thing. So once again what I am doing is loosening the amphenol connector until the center conductor is backed away. So all the noise is much quieter and I am able to trace signals using the gain as needed. If I screw the connector in the noise is just awful and the gain must stay almost all the way down. Strangely what this amounts to is the probe working with only the shielded side of the circuit connected. That really doesn't make sense electrically.
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:12 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.