Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 03-18-2016, 04:26 PM
Kamakiri's Avatar
Kamakiri Kamakiri is offline
Administrator
 
Join Date: Jun 2002
Location: Buffalo, New York
Posts: 5,109
This is absolutely crazy.

I added another 750 ohm resistor with little effect. All of a sudden, BAM, picture blinks into focus, and the beam is off center. I center the beam and much to my surprise, start watching TV, adjusting the now inadequate width and too much height.

All of a sudden, BINK....it goes out of focus again, loses horizontal sync, and all of a sudden the picture beam shifts down and to the right. I tap around, nothing, and then BINK, comes back.

Picture tube? Yoke?

I replaced the focus magnet with one off an identical chassis, even though it tested fine....but that had no effect. With everything I replaced, the ONLY thing I can think of is an intermittent short or something in the electron gun of the picture tube changing the angle of the beam and bringing it out of focus.....or a bad yoke.
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia."
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:47 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.