Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-02-2016, 09:36 AM
kf4rca kf4rca is offline
VideoKarma Member
 
Join Date: Feb 2015
Location: Atlanta
Posts: 970
Too bad about the Syncmaster. I fixed one once and it was a shorted (melted down) width coil.
I have found that if you have problems getting good purity and /or convergence on a CRT, its usually due to a slipped shadow mask. Usually resulting from a fall.
Sometimes the cabinet cracks and sometimes it doesn't.
__________________
Reply With Quote
  #2  
Old 03-03-2016, 06:22 AM
jmetal88 jmetal88 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Derby, KS
Posts: 252
Quote:
Originally Posted by kf4rca View Post
Too bad about the Syncmaster. I fixed one once and it was a shorted (melted down) width coil.
I have found that if you have problems getting good purity and /or convergence on a CRT, its usually due to a slipped shadow mask. Usually resulting from a fall.
Sometimes the cabinet cracks and sometimes it doesn't.
Yeah, that could be what happened. When I got it, there was a small chip on the base and an abrasion on the face of the CRT, so I wouldn't doubt if it got dropped at some point.

The place with the replacement CRT never e-mailed me back, so I'm not sure what's going on with them.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.