Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 03-01-2016, 06:50 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Quote:
Originally Posted by Kawooa View Post
I'm planning on selling the 400 for a decent amount as all the non restored ones go for 50-100. Could ask a decent amount on a already fixed up and fully working one. But I need to sort out that low reading. Could it be the tester is just a lacking and sucky model that will always be this way? I replaced out the selenium recifier with a silicon diode and a 200ohm 5w in the power line in. I'll include a picture of my schematic modified to show such. I also installed a 1/2a fuse in the power line as well. I even replaced my 40kohm 10w resistor with another until I found out I made a mistake measuring the ohms and took my new 40k out. Why waste if the old was good
I think that you are being overly optimistic...if you examine the SOLD list on eBay, you will find that very few have *actually* sold for more than 10 bucks!

http://www.ebay.com/sch/i.html?_from...p2045573.m1684

I think I paid about $15 for mine, which included shipping, and it worked well.

jr
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:54 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.