Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Things with Motors

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-24-2016, 10:07 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by Kamakiri View Post
Grab a spray bottle full of water and start misting around the plug wires and cap. If it's that, the engine will stumble worse. Then, grab a can of carb cleaner and spray around the intake, TBI, and vacuum hoses. If it's a vacuum leak, you'll hear a change in the way the motor runs.
I've heard an unlit propane plumbing soldering torch will do the same thing with the added benefit of being easy on plastic and not leaving any flamable liquid on hot surfaces. If by some fluke the engine somehow lights your torch you have a small controlled flame rather than an engine soaked in a lit lake of flammable liquid.

I've yet to try it, but I plan to use that method to leak test the vacuum system on my Lincoln Mark V...First I'll let the air intake suck some of that propane in to confirm it changes the idle noticeably, then start looking for vac leaks....Once it gets warm.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:29 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.