Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-21-2016, 08:07 PM
decojoe67's Avatar
decojoe67 decojoe67 is offline
VideoKarma Member
 
Join Date: Apr 2011
Location: Long Island, NY
Posts: 1,322
Quote:
Originally Posted by dieseljeep View Post
The set must've been kept in a ideal place. As you stated, they're generally not in this kind of condition, especially the speaker grill!
I looked up the schematic, it's in Riders 6&7. The power cord is the resistance type, 300 ohms.
Did you try it? Does it work?
Yes, it has a resistance line cord. I powered it up on the variac and got nothing. One day I will get it up on my repairman's bench. Right now I'm just enjoying it as a piece of eye-candy!
.....and thanks Rick!

Last edited by decojoe67; 02-21-2016 at 08:14 PM.
Reply With Quote
  #2  
Old 02-22-2016, 11:15 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by decojoe67 View Post
Yes, it has a resistance line cord. I powered it up on the variac and got nothing. One day I will get it up on my repairman's bench. Right now I'm just enjoying it as a piece of eye-candy!
.....and thanks Rick!
If the set's totally dead, no tube light up or hum, it's possible that the resistance line cord is open, even though it looks to be in perfect condition.
The resistance element was made of an iron alloy, that was subject to rusting open. You can still use the cord, but only use the two line leads.
I use the capacitor-reactance method of heater dropping, about 12.3 mfd for your heater string.
BTW, the 12A7, rectifier and output tube is quite novel!
Reply With Quote
  #3  
Old 02-22-2016, 05:22 PM
decojoe67's Avatar
decojoe67 decojoe67 is offline
VideoKarma Member
 
Join Date: Apr 2011
Location: Long Island, NY
Posts: 1,322
Quote:
Originally Posted by dieseljeep View Post
If the set's totally dead, no tube light up or hum, it's possible that the resistance line cord is open, even though it looks to be in perfect condition.
The resistance element was made of an iron alloy, that was subject to rusting open. You can still use the cord, but only use the two line leads.
I use the capacitor-reactance method of heater dropping, about 12.3 mfd for your heater string.
BTW, the 12A7, rectifier and output tube is quite novel!
Thanks for the info. A friend had mentioned that it likely would be open. Although it's be cleaned and polished, it was originally very dirty with webs on the chassis, although almost no rust on the chassis. It seems like it was stored in a fairly dry environment, although likely enough to rust the iron element. I will eventually get it on my repairman's bench and have it working again.
Reply With Quote
  #4  
Old 02-22-2016, 09:51 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by decojoe67 View Post
Thanks for the info. A friend had mentioned that it likely would be open. Although it's be cleaned and polished, it was originally very dirty with webs on the chassis, although almost no rust on the chassis. It seems like it was stored in a fairly dry environment, although likely enough to rust the iron element. I will eventually get it on my repairman's bench and have it working again.
If possible, I'd like to see either the rear of the radio, with the back removed, or the chassis.
International Radio had specially designed parts to fit the small chassis, used in their sets.
Reply With Quote
  #5  
Old 02-22-2016, 10:43 PM
decojoe67's Avatar
decojoe67 decojoe67 is offline
VideoKarma Member
 
Join Date: Apr 2011
Location: Long Island, NY
Posts: 1,322
Quote:
Originally Posted by dieseljeep View Post
If possible, I'd like to see either the rear of the radio, with the back removed, or the chassis.
International Radio had specially designed parts to fit the small chassis, used in their sets.
It'll be a while before I can get pics of my set, so I linked a page that has pics and info. It does seem like a rather unique little chassis. I wonder how they perform??
http://www.radiomuseum.org/r/intern_..._jewel_40.html
Reply With Quote
Audiokarma
  #6  
Old 02-23-2016, 09:03 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by decojoe67 View Post
It'll be a while before I can get pics of my set, so I linked a page that has pics and info. It does seem like a rather unique little chassis. I wonder how they perform??
http://www.radiomuseum.org/r/intern_..._jewel_40.html
They actually perform rather well!
By using the regular hank antenna, if should pick up most of the locals and a few of the "clear channel" distant stations.
Reply With Quote
  #7  
Old 02-27-2016, 11:35 PM
decojoe67's Avatar
decojoe67 decojoe67 is offline
VideoKarma Member
 
Join Date: Apr 2011
Location: Long Island, NY
Posts: 1,322
Quote:
Originally Posted by dieseljeep View Post
They actually perform rather well!
By using the regular hank antenna, if should pick up most of the locals and a few of the "clear channel" distant stations.
I just got if off my repairman's bench and it does perform surprisingly well! The tone is the quality of a good cone speaker, which it actually is, but it's sensitive and produces good clear sound. The chassis was an easy fix and totally original. It never was serviced - until 80 years later!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.