Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Introductions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #14  
Old 02-12-2016, 10:48 AM
tomrosado tomrosado is offline
VideoKarma Member
 
Join Date: Feb 2016
Posts: 5
Thanks everyone for the help and encouragement. I want to clarify a little on the test I did on the CRT. I looked up the schematic for the picture tube (Tung-sol spec sheet) and it said that pins 2 and 12 were the heater pins. Using a Cen-tech digital multimeter model 98025 (cheapo version that I got free from harbor freight) I set the dial to 200 ohms. Before taking the measurement the readout reads "1" to the far leftmost position, there is blank space (enough for maybe 3 digits) to the right and then the decimal point is visible. When I cross the leads the value settles at 1.3 ohms. this differs from the manual which states that the shorted leads should read zero ohms. I put a brand new battery into the multimeter. At any rate, with these settings, the value on the multimeter when reading pins 2 and 12 is the same as described above a 1 to the left of the readout screen and the decimal point to the far right. My thinking is that this means no continuity. When I take other measurements using this setting for example the fuse on the power supply that squirrel boy mentioned it seems to give a legitimate reading - 1.3 ohms. Any ideas on what this reading means - is it an indicator that the picture tube is bad?

As for the CRT mounting - I think it is chassis mount so I will take the CRT and chassis out as a Unit. I did order the SAMS from ebay and am awaiting arrival.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:56 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.