![]() |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
I just repaired a Motorola clock radio from 1963. It was made in USA, more or less perhaps, but the radio circuit board was definitely from Japan, with Motorola-branded tubes labeled "Japan" and a Motorola-branded filter capacitor with Japanese-looking print. So, Motorola had an early start with non-U.S. manufacturing besides transistor radios, it seems.
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
|
#2
|
|||
|
|||
|
Quote:
Right around the time when the quality of Japanese products was being recognized as very high.
|
|
#3
|
||||
|
||||
|
Yes, 1960 was about the turning point when Motorola started using some non US made components, especially in their radios. In fact, that 1961 Motorola 23" b/w table set I posted a couple weeks ago had no foreign components which was somewhat of a surprise to me. It must have been one of the last "All American" Motorola TV's aside from the occasional Euro made tubes sometimes found in domestic sets.
Also, I should have been more clear though regarding the TS-924 set. This is a Motorola design in terms of cabinet styling, but entirely built by Sharp. Sharp essentially only needed to adapt their chassis to it. |
|
#4
|
|||
|
|||
|
Quote:
They were hot running sets and therefor more trouble prone. The Panasonics and the Toshibas of the day were also very hot running.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|