Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #22  
Old 01-05-2016, 09:10 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by bigaudioal View Post
Battery powered multi-meter. Set it to measure VAC on the 20 setting. Connected the ground lead of the meter to chassis and with the other lead still in my hand, not touching anything, meter was reading 4 VAC. Then touched it to pin 3 and that's when normal static in audio faded out and then saw smoke. Tried it twice with same result just to be sure.
Your meter, does it measure current and voltage, and have 3 terminals to attach test leads to? It should not be possible for a meter to cause smoke...Unless you had the 2 leads plugged into the high current measurement terminals of the meter (those terminals are shorted together with a short length of thick current sense wire).

Always measure voltage with the leads plugged into the voltage terminals on the meter....I made the mistake of measuring line voltage with the leads in the meter's high current measurement socket once and fried my meter!
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:00 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.