Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #21  
Old 01-05-2016, 08:09 PM
bigaudioal's Avatar
bigaudioal bigaudioal is offline
VideoKarma Member
 
Join Date: Mar 2012
Location: Gaithersburg, MD
Posts: 623
Quote:
Originally Posted by bandersen View Post
Yes, it should read nearly 0 ohms. Replacemenets are available. You could also just short it out with a jumper while testing to eliminate it as a problem. I had a Motorola where several of the filament chokes had corroded and gone open.



I'm not sure I understand when you say you connected the ground lead and saw 4 VAC. What was the other lead connected to ? Was it not connected to anything ? What type of meter are you using - is it battery or AC powered ?

Touching a meter lead shouldn't cause something to smoke unless you were on the current or resistance scale by accident.
Battery powered multi-meter. Set it to measure VAC on the 20 setting. Connected the ground lead of the meter to chassis and with the other lead still in my hand, not touching anything, meter was reading 4 VAC. Then touched it to pin 3 and that's when normal static in audio faded out and then saw smoke. Tried it twice with same result just to be sure.
__________________
-Al
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:18 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.