Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 01-02-2016, 06:12 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
The heater is shorted, trying to blast it out could open the heater killing the tube for good. In any case the heater is insulated from the cathode by a thin layer of insulating material, if it's shorting then the coating is gone or thin in a spot, blasting it with high voltage will only knock more of it off or weld the heater to the cathode.

Much better to just add a separate filament transformer, they are small and can be mounted discreetly under the chassis.
It's not a bad idea to use a transformer on a series string set in any case to protect the CRT from turn on surge, a lot of people do this on the Pilot 3" sets because the tubes are nearly impossible to find.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.