![]() |
|
|
|
#1
|
||||
|
||||
|
For the linearity control, I wonder why you couldn't use a 5K pot with a 1k resistor is series? Seems like that would be a functional equivalent. 8 meg is going to be tough, other than another parts set. 10 meg are out there. http://www.allelectronics.com/make-a...ear-pot/1.html
edit - just found this. http://www.ebay.com/itm/1-Clarostat-...UAAOSwKPNTyrQw If there's room to mount these type pots, I'd try it with a 1 meg resistor is series. Last edited by Kevin Kuehn; 12-27-2015 at 02:08 PM. |
|
#2
|
||||
|
||||
|
Quote:
the chassis already has the mounting slots for individual pots so all I need to do is get a couple of the right, or close enough values. I have a box full of Pots I bought off eBay so I'll go through those first, doubt there's an 8 meg in there but I might find something to replace the 6k. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|