Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 12-25-2015, 10:33 PM
Dubis7's Avatar
Dubis7 Dubis7 is offline
Alchemizes cash to tubes
 
Join Date: Nov 2014
Location: Leesburg, VA.
Posts: 397
One side of the new transformer has four leads, meaning two windings, while the other side only has two leads meaning it connects to one winding.. I want to assume the side with only two leads is the primary, but the primary on the schematic is the 28 ohm winding, and the isolated leads on new transformer show .3 ohms.

Should I assume that the 20 ohm winding is the primary, as it's closest to the primary on the schematic?

When I say primary, I'm talking about the side that's directly wired to the power switch and wall plug. I could be thinking about this wrong.
__________________
To keep your tubes running smoothly, make sure to dust underneath the glass as well.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:48 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.