|
|
|
#11
10-30-2015, 09:11 PM
|
||||
|
||||
|
We always used an RGP15-20 for any scan derived power supplies. It's a fast recovery 2000V 1.5A diode, and works perfectly in my CTC16, and cheap at a quarter for one diode, far cheaper than the NTE506.
http://www.fagorelectronica.com/imag...or/rgp1520.pdf RCA specified this type in the later chassis(M134, CTC203) and once we figured out the root part number, we ordered a bunch and never looked back. great for boost diodes, and convergence diodes. Conventional diodes like the 1N4007 and 1N5408 are just too slow, and tend to overheat.
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! Last edited by Findm-Keepm; 10-30-2015 at 09:16 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode