sylvania gt matic

[zeno]

The magnets must have fallen out BUT you can use vasoline to hold
the screw.

http://www.ebay.com/itm/4-Xcelite-Ma...item3f534b82d0

The 5/16 was used in Admiral & others. Also made a XL philips
for rice boxes. Almost all Xcelite are of the highest quality.

73 Zeno

Originally Posted by zeno

Get the old extra long Xcelite 1/4. Takes 5 yrs to round one out with
constant use. Also has a magnet & is indesposable when pulling
tuners on consoles or on 19" Zenith hybrids. Mine are buried.
If I can find one I will give u the model so you can watch E-bay
for one. Once you have it they will have to pry it out of your
cold dead hands !

73 Zeno

[Dan Starnes]

I had one of those way back. Cool!!

[Jon A.]

Originally Posted by zeno

The magnets must have fallen out BUT you can use vasoline to hold
the screw.

http://www.ebay.com/itm/4-Xcelite-Ma...item3f534b82d0

The 5/16 was used in Admiral & others. Also made a XL philips
for rice boxes. Almost all Xcelite are of the highest quality.

73 Zeno

Whoa, I could use those to beat the crap out of an attacker as well.

They're a little rich for my blood at the moment, especially with the abysmal exchange rates. I'd rather wait out a set complete with magnets anyway. At least I now know what to look for.

[DavGoodlin]

Originally Posted by zeno

The magnets must have fallen out BUT you can use vasoline to hold
the screw.

http://www.ebay.com/itm/4-Xcelite-Ma...item3f534b82d0

The 5/16 was used in Admiral & others. Also made a XL philips
for rice boxes. Almost all Xcelite are of the highest quality.

73 Zeno

Xcelite tools were totally worth the extra money, they sit on my bench to this day. I dont lose them like the others because they stay in the shop

I have a mini-shorty 5/16" model P10 in my pocket today for some reason