|
The HV rect. could be the problem......It could be that the previous issues were a weak HV rect, and the filament opened since then killing the tube. A good way to tell in absence of a tube tester is to ground the blade of a flat edge screw driver, with the set off lift the top cap on the rect enough that some of the metal is exposed, turn the set on and try to draw an arc/corona off the HV rect top cap. If all is well with the fly etc. you should be able to draw a 1.5" or longer arc from the HV rect. top cap. On some of the rubber tire fly roundys one can draw 1/2" of spark off the fly tire.
|