Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 10-10-2015, 11:02 AM
MIPS's Avatar
MIPS MIPS is offline
VideoKarma Member
 
Join Date: Jun 2014
Location: West Canadia
Posts: 1,023
Quote:
Originally Posted by kf4rca View Post
I agree that its the input coupling cap from the sync separator. As caps get old they no longer pass low frequencies (30 Hz.) but they do continue to pass high frequencies.
Does that set have a vertical integrator network? Thats a three legged ceramic network. They go bad too but can easily be duplicated by discrete components.
We do have a hybrid circuit, yes. Connects from pin 6 on a 6U8 (Sync Nosie Sep. Lim.), through itself, a 22K resistor, .01 cap I replaced and to pin 1 on the 12BH7. Seems to consist of three resistors (22k, 8.2k and 8.2K) and three capacitors (.002, .005 and .005) While I was trying to figure out my width control problems I was testing it on the bench to see if it least ohmed out right and that seemed correct but never tested it any further.
I know someone here has a copy of the schematics. My digital copy is currently on a server which is a little...sick.

Last edited by MIPS; 10-10-2015 at 11:09 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:20 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.