![]() |
|
|
|
#1
|
|||
|
|||
|
Well after finding a replacement filter cap in the vertical section in which I had pushed it where the leads were touching (why I had no vertical), and another short; I am finally ready to post my 1str results on the screen.
I can't tune the signal in. The tuning slug doesn't get it any plainer than this. Tuner tubes and IF tubes have been subbed with no change. Sound is just a weak buzz. Video IF voltages check ok.. I'll start checking other voltages next |
![]() |
| Thread Tools | |
| Display Modes | |
|
|