Quote:
Originally Posted by Winky Dink
To put this short thread to bed:
A week after the last post, I was ready to give the tube a long run. First I retested it. No grid current.
Thanks for saving me from returning a perfectly good component, and I'm glad I saved the several tubes I had set aside previously due to grid current.
|
Two things come to mind ...
If you have cleaned your switches in the tube tester by hosing them down with contact cleaner ...
Or if you have the tube tester in a very humid location (read basement of an non-air conditioned house), that will definitely cause an erroneous grid current reading.