![]() |
|
|
|
#1
|
|||
|
|||
|
did you check those resistors in the Boost to plate of the 6BA11, 330k and 470k? and order up that .1 1kv while you are at it.
|
|
#2
|
||||
|
||||
|
Quote:
I was not able to change the 475V sections like I wanted too in C5, but I replaced C6 and the smaller values of C5. Progress was made. The image is sharper, converges a little better, and the image no longer buckles, collapses, or flexes on fast moving, or very bright images. |
|
#3
|
||||
|
||||
|
What about this? I know it's NOS but the seller has a good rating and claims it tested good.
It has all 3 sections I need of perfect values to what I'm needing in my vertical section. http://www.ebay.com/itm/NOS-Sprague-...item1ea3cd139e |
|
#4
|
||||
|
||||
|
6917 date code? No way - I'd stay away from that - manufactured before Neil Armstrong took a giant leap.
I'd go with caps under the chassis, or restuff - Doug's step-by step is pretty helpful. You'd be surprised at how small electrolytics have become - in some cases, about 1/3rd the size of those made just 15 years ago... Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
|
#5
|
|||
|
|||
|
Quote:
. |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|