Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 09-16-2015, 04:39 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by zeno View Post
That will work. A caution on fusables. At an RCA seminar a few
complained that the fusable always opened & not the fuse. TRUE !
They said its because the fusable protected the fuse. TRUE !
Bottom line is when you turn on a set there is a very heavy
current draw to charge up the filter cans. The fusable limits
that & lets the caps charge slowly. If it wasnt there the fuse
would soon fail. It also acts as a fuse, I have only seen them open
with a shorted rectifier or for NO reason, just age. Sets with
them rarely blew fuses !
Last thing is its important on solid state sets with kick-start
circuits. They depend on the slow & proppor rise of the B+ often.

73 Zeno

Zeno,

Remember the Surgistors? The resistor that heated up and closed a bimetallic strip that carried the current? Workman and GC had replacements - I still have a couple, and may add one to my Setchell Carlson.

As to fusibles - Workman had several types - the heavy duty white one, the pink ones in 4.7, 5.6 and 7.5 ohms, and a square cement version called "FUZIT" that they sold in packs of 5. Philcos, RCAs and Sears sets I remember were the fusible killers - always opening up. RCA had one that was soldered to a little phenolic strip, and they dipped the whole thing in varnish. You could tell one had failed - there were flakes of varnish around the resistor.

Nowadays, it's smart to add a CL60/80 NTC in series with the line. Folks think it's something new, but surge/fusible resistors have been used for years, i tell 'em.
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:34 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.