Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-11-2015, 12:23 AM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
Again (if you haven't already done so), check continuity from the centertap of the Power xfmr's HV secondary to ground.

It should show continuity, and read several hundred ohms (variable a bit with the focus control setting).

What reading do you get?

(EDIT) I just noticed sumpthin' in the schematic concerning the two 80uf filter caps C152B and C152C. The polarity markings are correct, however the symbol for C152C is backward, i.e., The radiused (curved) line is on the wrong side.
Be sure C152C is installed correctly (negative side to point 'C' and positive side to ground).

Last edited by old_coot88; 09-11-2015 at 01:05 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.