Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 09-05-2015, 01:42 PM
tom.j.fla tom.j.fla is offline
VideoKarma Member
 
Join Date: Aug 2014
Location: Dover,Fl
Posts: 250
Hi, Looking over the specs' of the two CRTS the 16BDP4 has a 450 ma. heater and the 16BNP4 has a 600 ma. heater. Also the 16BNP4 only needs about 30 volts peak to peak drive signal. Where as the 16BDP4 needs 100 volts peak to peak drive signal. The G-2 voltage and taking care of the heater current is easy jut using resistors. The 100 volt peak to peak video drive signal not so easy. You should test the CRT maybe a lite cleaning on restore mode of a SENCORE tester is all it needs. I would try a pass on the CRT tester and keep looking for a tube that has specs close to the tube you half now, but make sure it is a low drive tube. All the best,tom.j.fla
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.