![]() |
|
|
|
#1
|
||||
|
||||
|
Hey - good to see you getin into it with the pickup !
I have not had trouble with my gauges so for sure I don't know how they work, just offering up some ideas.... I had to work on some GM gauges and was told about the oil damped thing.... I thought it was too much work for the cheap 3 to do, but it did have the blinker signal on it when I measured it.... I think it was a '76 GMC 6 yard dump I was working on.... I always kept that in my mind for gas gauges that hold their value when shut off.... I'll look at my manual on the Dodge one evening.... My rack has a leak on it too, but it's small, I ain't gunna do anything with it.... Good to know about the alternators.... But I bet my '88 has a different mount than yours. I'm gunna have to put up my picts from floor fixing on the '86 Prelude I did this past July. I hate welding upside down..... You got too much love into that truck to give it up ! .
__________________
Yes you can call me "Squirrel boy" |
|
#2
|
|||
|
|||
|
Exactly!
And I think I know where you're coming from on gauges. GM does their gauge setup different, and something from the 70's, yeah that probably would have oil or something in it. So... I spent today using a hacksaw to cut off a new tailpipe over at Parts galore, then got home and used my Dremel to remove the old pipe. Attached is a picture of the old muffler and tail pipe... where you can see my attempts to quiet it down long enough to get the money and time needed to fix it. New tailpipe came from a 98 Dakota, so it doesn't perfectly match up but I can work with it. It's the right size for the new muffler which is the most important thing. Putting on the new exhaust tomorrow! Also, seems like I might just need to replace an O ring or some kind of sealing ring to fix the power steering leak, so I'll probably do that tomorrow as well. Also went online and found out how to reset the computer, so I'll see if that has any effect on acceleration. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|