![]() |
|
|
Thread Tools | Display Modes |
|
#2
|
||||
|
||||
|
The motor shaft is likely supposed to extend when it gets power (I don't have any RCA remote sets, but a few Zeinths and an Admiral) and engage with some gears. THe shafts were usually greased and the grease gets old and can stop the spinning and or the shaft extending. I had a motor shaft that did not want to extend on a Zenith due to old grease....Spraying some WD-40 on the shaft and cycling it fixed the problem.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Thread Tools | |
| Display Modes | |
|
|