![]() |
|
#18
|
||||
|
||||
|
Quote:
What ultimately fixed it WAS tweaking the trip lever (lays on top of the slide) that fixed it . Don't underestimate how many issues this thin piece of aluminum can cause when it is ever so slightly bent or gummed up as usual. As the changer was operated repeatedly into the wee hours, I noticed how the slide and trip lever moved in unison as tonearm set down on the record lead-in groove. It was this movement that caused the tab on the trip lever to just catch the on-off lever when going by it. Operating the working Motorola changer, I saw that the trip lever was bent down slightly at the end toward the power switch, so I did the same thing to this Philco. This is not the end of this thread though, I have four more V-Ms to work on
__________________
"When resistors increase in value, they're worthless" -Dave G Last edited by DavGoodlin; 08-27-2015 at 12:36 PM. |
| Thread Tools | |
| Display Modes | |
|
|