Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 08-24-2015, 10:02 PM
Bill R Bill R is offline
VideoKarma Member
 
Join Date: Oct 2004
Location: Jackson, TN
Posts: 893
I have been looking at that as well. I have not pulled the chassis out yet, but there are 3 controls on the front. I know one is tuning, one has to be volume, but what is the other one. I see R4 on the schematic, looks like it would change the sensitivity or the final RF amp stage. I could see that controlling volume. HA1 and HA2 on the schematic look like maybe they are used for hum balance. One for the 26 filaments, and one for the 27 filament and pilot lamp. Maybe those are ganged and are the third knob on the front. That would seem odd, but I don't see any other controls on the schematic. Other than the switches of course, one for power and one for sensitivity of the antenna coil. I am not familiar with the speaker either. This looks like a large magnet with an armature that connects to the cone instead of a voice coil. I will get some pictures up as soon as I get it unloaded from the van and in the house.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:12 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.