|
Two versions out there
The newer one has external audio input selectable by the audio switch. Also they use different pickup tubes. The newer one has a sharper image which I think is due to the different pickup tube since the circuitry is the same.
If you have vertical troubles change all the 2.2 Meg resistors in there. You can get patterns off the web, print them on a inkjet printer, then take the print to Staples and have a transparency made. Costs about 50 cents.
I have 2 1076's. One old and one new.
|
08-22-2015, 04:04 PM
Threaded Mode