Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 08-21-2015, 05:36 PM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
I've been busy the past week, but now that I finally have some time to think about this … I know how the bridge rectifier works: that when the AC flows in one direction it goes through one pair of diodes, the opposite direction it goes through the other pair of diodes, and you get a full-wave rectifier instead of just half. I see that that .1 uF cap would filter the AC on the heater string. But I don't understand where the DC on the heater string comes from, or how the amount of AC vs DC voltage on the heater line changes with the tube position. (I would think that the total voltage drop across each tube would depend only on the resistance the filament, and would not change if its position were changed)

Last edited by Adam; 08-21-2015 at 05:40 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:44 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.