Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 08-21-2015, 07:08 AM
roundscreen roundscreen is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: buffalo ny
Posts: 377
Quote:
Originally Posted by Electronic M View Post
I've been running a CTC-15 clone as a daily driver straight from the line for about 5 years. The first two were in an area where the line voltage ran high probably 120-125, since then it is usually 117 give or take 6 volts. I've never had a problem with the fly going into over-current....Granted I did monitor and dip the cathode current by adjusting the linearity coil (which is probably a better way to control it than a variac).

If you are worried about overheating the fly adjust the lin. coil for min H out Tube cathode current and leave the HV cage door open for ventilation.
You are right. The cathode current must be adjusted for proper dip. If this is not done, The current will run high no matter what the line voltage is. Still, Why beat on the set if you don't have too. He want's to use the set as a daily driver and the variac will give him some added protection. Running the set at the line voltage it is rated at.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:58 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.